Open-Smart 3.2 inch TFT LCD Shield ILI9327 Resistive Touch Screen Display Expansion Board Compatible with UNO R3 Mega2560 Leonardo FZ3286A
This is a 3.2-inch TFT touch screen expansion board, which uses a standard Shield interface with strong compatibility. It integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, and level conversion circuit, making secondary development easy. With GPRS module, mobile phones can be made.
With NFC read-write module, you can make access control and photo display system. With voltage and current sensors, oscilloscopes can be made.
-UNO R3 and its compatible motherboard can directly use it to display characters and graphics, BMP format pictures, and can realize touch control
-Compatibility: Since the SD card is connected to the SPI pin of the ICSP interface, it is compatible with UNO R3 / Mega2560 / Leonardo
-Touch screen type: resistive touch screen-Touch pen: 9cm in length
-Display size: 3.2 inches
-Operating voltage: 5V
-Logic level: 5V / 3.3V
-Onboard 3.3V/300mA voltage regulator circuit
-Operating current: the maximum value is 150mA
-Use A0-A3 pins, D4-D13 pins, and I2C interface, D0 / D1 / D2 / D3 are available, please refer to the product schematic diagram for details
-Onboard Micro SD card holder, support Micro SD / TF card
-Onboard LM75 temperature sensor: The default I2C address is 0X48, and the range is -55 ~ 125’C
-Very suitable for making digital photo frames, oscilloscopes, function generators, detection system displays
1 X Open-Smart 3.2 inch TFT LCD Shield ILI9327