Waveshare CoreH743I MCU Core Board STM32 Cortex-M7 STM32H743IIT6 Minimum System Development Board Full IO Expander JTAG/SWD Debug interface

Waveshare CoreH743I MCU Core Board STM32 Cortex-M7 STM32H743IIT6 Minimum System Development Board Full IO Expander JTAG/SWD Debug interface
Click image for Gallery
  • Product Code: WS0027-STM32H743IIT6 MCU Core Board
  • Availability: In Stock
  • $34.99
  • Ex Tax: $34.99
  • Price in reward points: 4
  • 2 or more $33.99
  • 5 or more $32.99
  • 10 or more $31.99
- +



Tags: CoreH743I, STM32, Cortex-M7, STM32H743IIT6, Core board, Minimum System board

Description:
 
CoreH743I is an STM32 MCU core board designed for STM32H743IIT6, supports further expansion. It is ideal for starting application development with STM32H family.
 
    Minimal ready-to-run system, integrates clock circuit, USB power management, USB connector, etc.
    Onboard 64M Bit SDRAM
    All the I/O ports are accessible on the pin headers
    JTAG/SWD programming/debugging interface
    2.0mm header pitch, allowed to be plugged-in your application board

What's on the CoreH743I
1, STM32H743IIT6
Cortex-M7 32-bit RISC + double-precision FPU + Chrom-ART graphic accelerator
Operating Frequency: 400MHz, 856 DMIPS/2.14 DMIPS/MHz
Operating Voltage: 1.62V-3.6V
Package: LQFP176
Memories: 2MB Flash, 1MB RAM (864KB User+192KB TCM+4KB Backup)
2, IC42S16400J / IS42S16400J
SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
3, STMPS2151STR
onboard USB power management device
4, AMS1117-3.3
3.3V voltage regulator
5, 8M Crystal
6, 32.768K Crystal
for internal RTC, or used for calibration
7, Reset button
8, VBUS LED
USB port led indicator
9, PWR LED
Power led indicator
10, "5Vin" or "USB"
Powered by 5Vin or USB connection
11, BOOT setting
 for configuring BOOT0 pin
12, JTAG/SWD port
for debugging/programming
13, USB port
supports Device and/or Host
14, MCU Pins interface
VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
15, POWER JMP
VBAT: short the jumper to use system power supply, open it to connect external power, such as battery
VREF: short the jumper to connect VREF+ to VCC, open it to connect VREF+ to other custom pin via jumper wire
16, OTG JMP
short the jumper when using USB OTG/HOST
open the jumper to disconnect from related I/O port

Note: CoreH743I provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.

Wiki: www.waveshare.com/wiki/CoreH743I


Package included:
1 X STM32H743IIT6 MCU Core Board

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products