Description: The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.
The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time to-market.
Support Tri-Band 4G FDD-LTE B3/B8/B20
Support 2G GPRS/EDGE 900/1800Mhz
Control Via AT Commands
Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V
Operation temperature: -40°C to +85°C
Dimensions.24 X 24 X 2.6mm
GNSS (GPS,GL ONASS and BeiDou/Compass, Galileo, QZSS)
- Uplink up to 375kbps, Downlink up to 300kbps
- Uplink up to 66kbps, Downlink up to 34kbps
-Uplink up to 236.8kbps, Downlink up to 236.8kbps
-Uplink up to 85.6kbps, Downlink up to 85.68kbps
Power off: 7uA
USB Driver for Microsoft Windows XPMista/7/8
USB Driver for Windows CE/Mobile
USB Driver for Linux/Android
USB2.0 X 1 (high-speed)
UART X 2 (7-wire UART and 2-wire UART interface multiplex from GPIO)
SIM Card X 1 (1.8V and 3V)
I2C X 1
ADC X 1
You can't connect the micro USB interface to power the board directly.
You need use Arduino Uno or Serial module to connect with SIM7000E board.
Connection for SIM7000E and Uno: Power -- 5V GND -- GND TXD -- RXD RXD -- TXD V_MCU -- 5V
Connection for SIM7000E and Serial module:
Note: you need install driver for the serial module and switch it to 3.3V