ESP32-S2-Saola-1 Development Board based on ESP32-S2 WROVER Espressif ESP32-S2-Saola-1R/ESP32-S2-Saola-1M FZ4546

ESP32-S2-Saola-1 Development Board based on ESP32-S2 WROVER Espressif ESP32-S2-Saola-1R/ESP32-S2-Saola-1M FZ4546
Click image for Gallery
  • Product Code: FZ4546-ESP32-S2-Saola-1R
  • Availability: In Stock
  • $18.99
  • Ex Tax: $18.99
  • Price in reward points: 3
  • 2 or more $17.50
- +



Tags: Espressif, ESP32-S2-Saola-1, ESP32-S2, ESP32-S2-WROVER, ESP32-S2-Saola-1R

Overview

ESP32-S2-Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard.
To cover a wide range of users’ needs, ESP32-S2-Saola-1 supports:
*ESP32-S2-WROVER
*ESP32-S2-WROVER-I
*ESP32-S2-WROOM
*ESP32-S2-WROOM-I


Descriptions:


1, ESP32-S2-WROVER
ESP32-S2-WROVER is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.
2, 2X20Pin I/O Headers Connectors
All available GPIO pins (except for the SPI bus for flash and PSRAM) are broken out to the pin headers on the board. Users can program ESP32-S2 chip to enable multiple functions such as SPI, I2S, UART, I2C, touch sensors, PWM etc.
3, USB to UART Bridge
Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
4, Boot Button
Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port.
5, Micro-USB Port
USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-S2 chip.
6, RGB LED
Addressable RGB LED (WS2812), driven by GPIO18.
7, 3.3V Power On LED
Turns on when the USB power is connected to the board.
8, Power Supply (3 methods)
5V via Micro USB port (default)
5V and GND header pins
3V3 and GND header pins


Note: ESP32-S2 only supports ESP-IDF master or version v4.2 and higher.

Package included:
 2 X ESP32-S2-Saola-1R


If you need
ESP32-S2-Saola-1M, pls contact me by email(betty@unikelc.com), or leave notes when you placed the order, thanks.






Write a review

Note: HTML is not translated!
    Bad           Good

Related Products