Feetech FT6325M Digital Servo 25KG 360degree Full Steel Gear High Torque Waterproof Core Motor for RC baja Car Boat Helicopter Airplane FZ4581

Description:
Feetech FT6325M is a full steel gear standard digital servo, with 20.5kg.cm @6V.
High torque more powerfull, Full steel gears,improve servo's accuracy and extend its service time.
Internal Hall effect position sensor, Controllable angle range from 0 to 360 degrees, for Robotic,RC,Industry and others large angle control requirements.
Aluminum Case enhances heat dissipation and ensures servo motor work properly Excellent linearity, precision control, It is also a Multi Turn servo,5 turns*360 degrees（500-2500us).
No need to manually “center” the servo, PWM Command Signal.

Specification:
Size：55X20X43
Operating voltage: 6V-8.4V
Rated Torque: 8.3kg.cm@7.4V
Peak Stall Torque: 25kg.cm@7.4V
Stall Current: 3.5A@7.4V
No Load Speed: 0.151sec/60degree@7.4V
Runninng current(at no load): 120mA@7.4V
Limit Angle：No limit
Case material：PA+Aluminum
Gear material：Steel
Bearing type：Ball bearings
Angle Sansor：Type 12 Bite Magnetic Encoded
Angle：360°
Plug Connector: JR Type
Cable Material：PVC
Cable Length：30CM
"Pin Definition：1 Signal
                          2 Vcc
                          3 GND"
Horn Type：25T/5.9mm
Gear Ratio：1/275
Back Lash：≦0.5°
The rocker phantom：0°
The rocker screw：M3X6
Motor：Core Motor

Control Specification：
Command Signal：Pulse width modification
Control System Type：Digital comparator
Operating Travel：360°(at 500→2500μsec)
Left&Right Travelling Angledeviation：≤ 1°
Centering Deviation：≦1°
Neutral Position：1500 μsec
Dead Band Width：≤4 μsec
Rotating Direction：Counterclockwise(1500→2000 μsec)
Pulse Width Range：500→2500 μsec
Electronic Protection：Stall 8sec
Temperature protection：>70°C

Package included:
1 X FT6325M 25KG 360degree Digital Servo
1 X 25T Metal Arm
1 X Accessories set