Basic model: FS-GR3E 3CH 2.4G Receiver, non-waterproof version
Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S.
This 3CH receiver is very easy to bind very fast link-up, strong signal distance.
Reliable, interference free 2.4GHz AFHDS signal operation. Long range over 1000 yard.
The Standard 2.4Ghz 3-Channel Receiver for RC car and boat
Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind
channels: 3 channels
model type: airplane,glid
code type: PPM
certificate: CE FCC
power: 5V DC(1.5AAA x 4)（not included)
Original box: NO
size:35.5 x 22 x 13mm
Antenna lenght :180mm
Color : Black
A. Install the battery to 2.4G transmitter and shut it down.
B. Insert the matching lines to the channel BIND/CH3 port of the receiver.
C. Connect the receiver battery to VCC port of the receiver, on the same time the two LED are
flashing and this means the receiver are going to the matching status.
D. Press and hold the button on the transmitter, and then switch on the power supply.
E. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful
Matched. (This process about 5s)
F. Release the match button on the transmitter, take out the match line.
G. Install the server and then test.
H. If the tests fail, please repeat the action above.
G. If the tests success, then insert the power supply port into VCC, match complete.
(The above ways of match is only suitable for FLYSKY 2.4G products)
Upgraded model: FS-GR3E 3CH 2.4G Receiver, waterproof version
Certification: CE certification, FCC certification, RoHS certification
operating frequency on the receiver to
1. Off control, off the receiver
2. The frequency of the cable into the receiver ch3, open the power receiver, the receiver lights flash
3. according to bind the control key (big wheel above the minimum), open controlled power
4. The receiver light does not flash, indicating that it has paired
5. Close the receiver, the frequency of the line on the bond - ch3
6. Close Control
7. reopened control, open receivers, you can use the device
The number of channels: 3 channels
The high frequency mode: GFSK
High Frequency Modulation: PPM
Power: 5V DC (1.5V AAA * 4)
The antenna length: 176mm/6.9 inch
Size: 35 x 21 x 13mm/1.4 x 0.8 x 0.5 inch
1 X FS-GR3E 3CH 2.4G Receiver
Option 1: NON-Waterproof version
Option 2: Waterproof version