DIY Kit of 1pc Keyes L298P Motor Shield + 1pc DIYmall UNO R3 Development Board + 4pcs TT Motor Dual Shaft

DIY Kit of 1pc Keyes L298P Motor Shield + 1pc DIYmall UNO R3 Development Board + 4pcs TT Motor Dual Shaft
Click image for Gallery
  • Product Code: KY0013+DIYmall0004+FZ0518X4-L298P Motor Shield UNO R3 TT motor
  • Availability: In Stock
  • $33.99
  • Ex Tax: $33.99
  • Price in reward points: 3
  • 2 or more $31.99
- +

Tags: Keyes, L298P Motor Shield, Expansion Board, UNO R3, development board, control board, TT Motor

Keyes L298P Motor Shield



There are many way to drive motors, like driving motor via L29P chip. 

L298P is specialized driving chip for high power motor rolled out by ST Company. It can drive DC motor, 2 phrase and 4 phrase stepper. Equally, its driving current is up to 2A and its output ends adopt eight schottky diodes for protecting.

Therefore, we design this shield with stack design that can be inserted into UNO R3 board directly, greatly reducing the technical difficulties on operation and driving motor.

The external power supplies power for driving expansion board and UNO R3 board when  driving shield is stacked on UNO R3, BAT is plugged in and DIP switch is dialed to ON end.

The PH2.0-2P anti-inverse port prevents from the circuit damage and wrong motor direction due to wiring power inversely.

At the same time, the driving expansion board comes with a 2.54mm female header interface, which is also a serial communication interface, compatible with commonly used Bluetooth module line sequences on the market, such as HC-06 module and HM-10 module.

To interfaced other sensors and modules easily, driver board comes with 3pcs XH-2.54mm 3P, 2 pcs XH-2.54mm 4P and  one XH-2.54mm 5P anti-inverse ports. Moreover, expansion board extends 2 digital ports, 2 analog interfaces and 1 I2C communication port with a pitch of 2.54mm pins. And a reset button facilitates reset processing any time.

 The shield can be connected directly four DC motors via jumper caps connection. A1 and A2, B1 and B2 are in parallel connection. Eight jumper caps decide the rotation direction of 4 motors, for instance, the horizontal connection of two jumper caps on A1 motor is changed into vertical connection, that leads the inverse rotation direction


Technical Parameter:

Input voltage: DC 7-9V 

Working current of logic part: <36mA 

Operating current of the driving part: <2A 

Maximum power dissipation: 25W (T=75℃) Control signal input level: high level 2.3V<Vin<5V, low level -0.3V<Vin<1.5V 

Working temperature: -25+130℃ 

Size: 69*53*26mm 

Weight: 25.2g

DIYmall UNO R3 Development Board with Blue USB Cable

Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I/O Pins: 14 (of which 14 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
Clock Speed: 16 MHz

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products