Raspberry PI RPI SIM5320A 3G GSM GPRS GPS Expansion Board with 3Channel Rapsberry Pi Relay Board FZ2694+WS0001

Raspberry PI RPI SIM5320A 3G GSM GPRS GPS Expansion Board with 3Channel Rapsberry Pi Relay Board FZ2694+WS0001
Click image for Gallery
  • Product Code: FZ2694+WS0001-SIM5320A+RPI Relay
  • Availability: In Stock
  • $93.99
  • Ex Tax: $93.99
  • Price in reward points: 10
  • 2 or more $92.50
  • 5 or more $90.99
  • 10 or more $88.99
  • 20 or more $86.99
- +



Tags: Raspberry PI SIM5320A 3G Expansion Board, RPI relay board

Note: Raspberry Pi board in picture is not included, it is only for display.


Raspberry PI RPI SIM5320A 3G GSM GPRS GPS Expansion Board WCDMA + HSDPA FZ2694

NOTE: This board can only work for USA 3G network,as AT&T phased out all 2G service January 1 in USA, 2017, this board is a good choice for RPI .

Description:

SIM5320A Chip:
Dual-Band WCDMA/HSDPA 850/1900MHz
Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz
GPRS multi-slot class 12
EDGE multi-slot class 12
Output power
WCDMA 850/1900: 0.25W
WCDMA 900/2100: 0.25W
GSM850/GSM900: 2W
DCS1800/PCS1900: 1W
Control Via AT Commands
Supply voltage range: 3.4~ 4.2V
Operation temperature: -30℃ to +80℃
Extended operation temperature: -40℃ to +85℃
Dimension: 30 * 30 * 2.9 mm

Input voltage:5-9V
Current:2A
Onboard 3.7V lithium battery interface
TTL Level communication interface,fully compatible with RPI
You can control sim5320A by level (5320_ON / OFF)
Onboard 3 red LED lights, used to indicate power, status and network conditions
Onboard lithium battery circuit for the SIM5320A RTC
Onboard 3G antenna SMA interface
Onboard RPI extension of the mother interface, fully support RPI
Support four headset interface (I type)
Support for updating the SIM5320A firmware and AT commands via the onboard MICRO USB
Onboard TVS tube, SIM card protection IC, two 220UF tantalum capacitors and other ways to make the development board stable performance
It support AT commands


Document link http://www.diymalls.com/files/FZ2694-sim5320a-3G.zip
user name and password is diymall



RPi Relay Board 3 Channel for Raspberry Pi A+/B+/2B/3B/3B+ WS0001


Description:
The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.

Feature:
    Supports Raspberry Pi A+/B+/2B/3B/3B+
    High quality relays, loads up to 250VAC/5A, 30VDC/5A
    Photo coupling isolation, prevent interference from high voltage circuit
    Onboard LEDs for indicating relays status
    Relay control jumper, allows to control the relays by custom pins other than the default pins
    Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835


Package Included:

1 X 3G SIM5320A Board
1 X RPI Relay Board

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products