Benewake TF-LC02 Lidar Ranging Module DC3-3.6V + 6-in-1 USB to TTL Serial Module CP2102 chip for Arduino Raspberry Pi STM32 Smart Car

Benewake TF-LC02 Lidar Ranging Module DC3-3.6V + 6-in-1 USB to TTL Serial Module CP2102 chip for Arduino Raspberry Pi STM32 Smart Car
Click image for Gallery
  • Brand: DIYmall
  • Product Code: TF0010+FZ2760-TF-LC02 Lidar Ranging Module with serial module
  • Availability: In Stock
  • $15.49
  • Ex Tax: $15.49
  • Price in reward points: 3
  • 2 or more $13.99
  • 5 or more $12.99
  • 10 or more $11.99

Available Options

- +



Tags: Benewake, TF-LC02, Lidar Ranging Module, USB to TTL, Serial module, 1.0mm connector to dupont wire, 6Pin male connector to jumper wire

Benewake TF-LC02 Lidar Ranging Module DC3-3.6V TTL Level mini Distance Detection Obstacle Avoidance Module for Arduino Raspberry Pi STM32 Home Robot Smart Car


Specification:

Measuring range: 3cm~200cm @ 90% reflectivity
Detection speed: 33msec
Accuracy:土2cm @ (3cm~100cm); ±5% @ (100~200cm)
Light source: VCSEL
Supply voltage: 3~3.6V
Center wavelength: 940nm
Average current: ≤15mA
Eye safety: Class1 (IEC60825- 1:2400)
Power consumption: ≤50mW
Field of view: ±9° (9° on the left and right of the optical central axis; 18° in total) 3
Communication level: LVTTL (3.3V)
Storage temperature: -20~85°C
Working temperature: -20~70°C
Size: 20mm* 11.5mm*7.6mm
Connector: 1.0mm 6P
Cable Length: 10cm(including connector)


Installation and use:
1. When installing, please ensure that the installation environment is sanitary and clean to prevent large particles of dust from adhering to the lens;
2. Avoid touching the circuit board directly with your hands, wear anti-static gloves or an anti-static wristband to operate;
3. There should be no obstruction between the lens part of the module and the mounting surface to prevent the optical path from being blocked and affecting performance;
4. When installing, the screws of the two mounting holes must be tightened, and the module must not slide left and right, and the lens of the module must be kept level.
-Low side);
5. The surface of the lens of the product should be kept clean during use. If there is dust or dirt or water droplets, it should be cleaned with cotton cloth immediately.


Application:
Mobile phone/tablet/computer and other terminal equipment
Measuring tools
For Smart home
Home robot


6-in-1 CP2102 Multifunction Serial Module USB to TTL 485 232 Converter Module 3.3V/5V

Description:

Core chip: CP2102
Small size:3.1 X 1,8CM
Compatible with 3.3V and 5V
Power suppy output
Overcurrent protection
TTL level interface
RS232 level interface
RS485 level interface
Four level can exchange freely
High-speed communication
DTR,RTS signal


Package included:

Default option: TF0010+FZ2760 TF-LC02 Lidar with USB to TTL Serial module

1 X TF-LC02 Lidar Ranging Module
1 X USB to TTL Serial Module 6-in-1 3.3V/5V
1 X 6Pin 1.0mm Male Connector Wire
1 X 4Pin 2.54mm Female to Female Dupont Cable

Other option: TF0010+FZ2760+TF0010-F+TF0010-M TF-LC02 Lidar with Serial module and cables

1 X TF-LC02 Lidar Ranging Module
1 X USB to TTL Serial Module 6-in-1 3.3V/5V
1 X 6Pin 1.0mm Male Connector Wire
1 X 4Pin 2.54mm Female to Female Dupont Cable
1 X 6Pin 1.0mm Male Connector to 2.54mm Male Dupont Wire
1 X 6Pin 1.0mm Male Connector to 2.54mm Female Dupont Wire

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products