Operating range: 0.2m~8m
Accuracy: ±6cm@(0.2-3m), ±2%@(3m-8m)
Range resolution: 1cm
Frame rate: 1~250Hz( adjustable )4
Supply voltage: 5V±0.1V
Average current: ≤70mA
Peak current: 150mA
Average power: 350mW
Communication level: LVTTL(3.3V)
Communication interface: UART/IIC
Default baud rate: 115200
Data bit: 8
Stop bit: 1
Parity check: None
Operating temperature : -20°C~75°C
Security and obstacle avoidance
Drone altitude holding and terrain following
Machine control and safety sensors
Distance measuring instrument
1 X TF-Luna LiDAR Module
Q1: Is TF-Luna available with 3.3V or other power supply voltage?
Sorry, it is not available for the time being. The Standard power
supply of TF-Luna is 5V±0.1V. If you have any further requirement,
please contact our sales person to consult a customization design
Q2: TF-Luna will heat up after operating for a while. Is it broken?
This is the normal operating condition of the product. The temperature
of the chip and circuit board will slightly up after a continuous
operation, which is a normal case.
Q3: Can TF-Luna be connected with Arduino or Raspberry Pi for use?
Yes, it can. TF-Luna adopts serial communication protocol so that it
can connect to any control board supporting serial port communication.