1pc/2pcs/5pcs/10pcs DIYmall WS2812 LED Ring 24 Bits 24 X WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers FZ1556
Communication interface:Single-wire communication
Inside Diameter :5 cm
Outside Diameter: 6.5 cm
5V to 5V
pin 6 to DI
GND to GND
1 X 24 X WS2812 5050 RGB LED
Q: Can this be stripped to a red, green, and blue wire (+power) to be wired to a different board? "
A:No, the WS2812 is a digital LED, it need to be controlled by a micro controller or AVR (such as an Arduino or ESP8266 board) with a digital pin and appropriate library
Q:Does this work with Raspberry Pi 3?
A:Yes, it can. As long as you have a 5v line (which the pi 3 has) then it should work
Q: Can I use raspberry pi to control the RGB led ring?
A: You can use raspberry pi to control the RGB led ring, the problem is RPI is 3.3V , and RGB led ring need 5V, so you need level shifter to convert the voltage. Please check the link: https://github.com/jgarff/rpi_ws281x
Q: Does each led require 18ma so the total 24 * 18 ma or total 432 ma ?
A: Yes, total is 24*18ma, this is for normal led brightness. You can also change code to change the led brightness, and the current will be different.
Q: Is this something I can program once and not
require data in? I need to program all led red or green and then power
down and up to the last color.
A: Yes, you can write code to achieve this function
have found an alternative idea on how to implement these but need to
know what sort of current these draw to run at maximum power. Could you
send over full specs of these please?
A: Please check this link
I want to make a macro lens light. 1. is there a similar product which
has a good cri white only output? 2. what wiring is necessary for that?
A: Please check this video https://www.youtube.com/watch?v=ZGHPHuuYisw
Hello, about the article: 16-bit 16 X WS2812 5050 RGB LED ring with
built-in drivers. How many colors can it emit? (orange, purple ...)
A: It can emit 256X256X256=16777216 colors
Q: Could i power three of these using 1 uno board and a 5v usb power outlet?
A: Yes, it can. Please use 5V 2A power supply