Waveshare Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Driver for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ FZ3729
*based on the design of Raspberry Pi interface for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+、Jetson Nano
*I2C interface control, only need 2pcs signal cable, to achive the servos driving.
*support max 16channel servo or PWM output, 12bits resolution per channel.
*onboard 5V Voltage regulator chip, output max 3A current, can offer power supply by VIN connectors.
*reserved I2C control interface, easy to plug in other main controller board
Power supply: 5V(RPI interface) or 6-12V(Vin terminal connectors)
Servo voltage: 5V
Logic voltage: 3.3V
Driver chip: PCA9685
Controller interface: I2C
Product size: 65mm*30mm
Via diameter: 3.0mm
Compatiable and connect directly to SG90 servo, MG90S servo and MG996R Servo
1 X Servo Driver HAT
2 X M/F brass standoff with screw and nuts