Featured

LGT8F328P UNO Development Board compatible with Arduino OCROBOT Open-source FZ3355

LGT8F328P UNO Development Board compatible with Arduino OCROBOT  Open-source  FZ3355
Click image for Gallery
  • Product Code: FZ3355-LGT8F328P UNO
  • Availability: In Stock
  • $9.66
  • Ex Tax: $9.66
  • Price in reward points: 3
  • 2 or more $8.66
  • 5 or more $6.99
  • 10 or more $5.99
  • 50 or more $5.45
- +



Tags: LGT8F328P UNO Development Board, UNO compatible with Arduino OCROBOT

Description:
Arduino compatible boards normally use Microchip Atmel microcontrollers. Almost LGT8F328P microcontrollers designed by LogicGreen and the Atmel ATMega328P microcontrollers add some functions, such as DAC output, PWM specific functions, and calculation accelerator (DSC), etc. The clock speed of the MCU is also double (32 MHz).
The Keyes UNO 8F328P control board is a development board designed with the LGT8F328P LQFP32 chip as core. It is not only compatible with the OCROBOT 0.1.2 IDE, but also compatible with the Arduino IDE. Before use, need to install the driver for the USB-to-serial port chip CH340G of control board.
We also provide a micro USB cable for you, so you can power up the control board and upload the code through USB interface. There are two methods for powering the control board, one is via USB interface, the other is via a black DC jack with input voltage DC7-12V.
This control board is fully compatible with UNO R3 board.
Besides, it comes with a slide switch, selecting the operating voltage VCC for LGT8F328P Chip, DC 3.3V or DC 5V.

Specifications:

(1) Main control chip: LGT8F328P LQFP32
(2) USB to serial port chip: CH340G
(3) Input voltage: DC 5V (Micro USB power); DC jack supply (DC 7-12V)
(4) Output current (total): 80mA
(5) Common port driven current: 12mA
(6)Digital port (27): RX0(D0); TX1(D1); D2-D13; A0(D14); A0(D14); A1(D15); A2(D16); A3(D17); A4(D18); A5(D19); PE1(D20); PE3(D21); SWC(D22); SWD(D23); PE4(D24); PE5(D25); AREF(D26);
(7)Analog port (8): A0-A5;  A6( PE1); A7 ( PE3)(12-bit 4096)
(8) Working frequency: 16MHz
(9) Comes with 4 LED lights: D13 indicator (labeled L) ; power indicator; Serial communication (RX TX)
(10) Comes with 1 reset button
(11) Comes with 1 Micro USB port: used to power up and upload the program
(12) Comes with a black DC jack: power supply (DC 7-12V)
(13) Comes with a slide switch: selecting the operating voltage for LGT8F328P chip (3.3V or 5V)
(14) Dimensions: 68mm x 53mm


Special Interfaces:

Serial communication: RX0 ; TX1
I2C communication:A4(SDA); A5(SCL)
SPI communication:D11(MOSI)、D12(MISO)、D13(SPCK)、D10(SPSS)
SWC(E0):1. SWD debugger clock input; 2.Differential amplifier input backward ; 3.Pin level change interruption 24
E1:1.ADC input channel ; 2. Analog comparator 0/1 common positive input ; 3.Pin level change interruption 25
SWD(E2):1.SWD debugger data;  2.Pin level change interruption 26
E3:1.ADC input channel ; 2. Analog comparator 1 positive input ; 3.Pin level change interruption 27
E4:1.Timer/Counter 0 comparator configuring output A ;  2.Pin level change interruption28
E5:1.system clock output ; 2.Analog comparator 1 output ; 3.Pin level change interruption29
AREF(E6):1.ADC Analog input channel ; 2.ADC external reference input ; 3.Pin level change interruption30
DAC(D4):8-bit                    

Package Includes:
1 X LGT8F328P UNO
1 X USB Cable

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products