1.5inch RGB OLED Display Module SSD1351 128X128 SPI IIC for Arduino Raspberry Pi STM32 3.3V-5V 16-bit High Color FZ3325

Description:
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.

Features:
    128x128 high resolution, 65K colors, clearly displays colorful images
    Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor


Specifications:
    Driver: SSD1351
    Interface: 4-wire SPI, 3-wire SPI
    Display color: RGB, 65K colors
    Resolution: 128x128 (most other competitive products are typically 128x64)
    Viewing angle: >160°
    Operating voltage: 3.3V / 5V
    Dimension: 44.5 x 37 (mm)

Interface:
SYMBOL     DESCRIPTION
VCC     Power (3.3~5V input)
GND     Ground
DIN     Data input
CLK     Clock data input
CS     Chip selection, low active
DC     4-wire SPI: Data/Command selection (high for data, low for command)
        3-wire SPI: Connects to GND, keeps low
RST     Reset, low active

There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
      BS     DC
4-wire SPI     0     DC
3-wire SPI     1     Connects to GND

Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable