LoraM3-D STM32L151C8T6 DIY0056

LoraM3-D STM32L151C8T6 DIY0056
Click image for Gallery
  • Brand: DIYmall
  • Product Code: LoraM3-D STM32L151C8T6
  • Availability: In Stock
  • $24.99
  • Ex Tax: $24.99
  • Price in reward points: 2
  • 5 or more $22.50
  • 20 or more $21.99
  • 50 or more $21.50
- +

Tags: LoraM3-D STM32L151C8T6

LORAM3-D Lora Development Board 868mhz 915mhz  STM32L151C8T6 SX1276 Lipo UFL IPEX DIYmall

Long range communication with lora 868/915
Low consumption, onboard lipo cell management
Virtual serial port via USB
Arduino IDE Compatibility.SWD/JAG

General specifications:
MCU : STM32L151C8T6 @32MHz
ROM : 64 Kb RAM : 16 Kb
EEPROM : 4 Kb Backup : 80 Bytes
3 USART, 2 SPI, 2 I2C, USB, 2 ADC 12Bit ...
Logic level : 3.3V (most IOs are 5V tolerant)

Power specifications:
Operating voltage:3.3v-5V(6.0V Max)
XH 1.25mm pitch battery connector
Ultra low dropout 600mA 3.3V regulator
Lipo cell management IC
Transmit current:128mA for 70mS
Receive current without sleep:14mA

Lora Specifications:
Chipset Semtech SX1276
uFl(IPEX) socket
Pin hole(allow wire antenna)
Hardware SPI communication with MCU
Transmitting power:+20dBm
Receive sensitivity:
-139dBm lora 62.5KHZ SF12 146bps
-136dBm lora 125khz SF12 293bps
-118dBm lora 125khz SF6 9380bps
-117dBm FSK 5KHZ 1.2bps
-110dBm FSK 20KHZ 38.4bps
Data rate:
FSK 1.2-300kbps
Lora 0.018k-37.5bps
Operating frequency:868mhz-915mhz
Digital RSSI function
Automatic Frequency correction
Automatic gain control
RF wake-up function
Low voltage detection and temperature sensor
Fast wakeup and frequency hopping
Highly configurable data packet processing
Antenna diversity and TX/RX switching control

Lora communication in EU and US bands
Low power applications
Lipo cell powered applications
Remote sensing and monitoring
MCU and wireless development

Package Includes:
1 X LoraM3-D board
2 X pin headers
1 X lipo battery connector

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products