DIYmall 4G SIM7000E Breakout Board for Europe / Korea / Thailand + CP2102 USB to TTL Serial Module + USB to 2.54mm 2Pin Dupont Female Connector Cable

DIYmall 4G SIM7000E Breakout Board for Europe / Korea / Thailand + CP2102 USB to TTL Serial Module + USB to 2.54mm 2Pin Dupont Female Connector Cable
Click image for Gallery
  • Brand: DIYmall
  • Product Code: FZ4112+FZ2760+DIY0087 SIM7000E 4G+serial module+usb cable
  • Availability: In Stock
  • $41.99
  • Ex Tax: $41.99
  • Price in reward points: 3
  • 2 or more $40.50
  • 5 or more $38.99
  • 10 or more $37.50
- +

Tags: SIM7000e, 4G, breakout board, NB-IOT module, serial module, USB cable

4G SIM7000E Breakout Board

The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc.
The module provides much flexibility and ease of integration for customer's application.

The package of SIM7000E is compatible with SIM900 and SIM800F.
AT commands of SIM7000E are mostly compatible with SIM800F.
This also maximizes the investments of customers, and enables a short time to-market.

General Features:

Support Tri-Band 4G FDD-LTE B3/B8/B20

Support 2G GPRS/EDGE 900/1800Mhz

Output power:

-GSM900: 2W

-DCS1800: 1W

Control Via AT Commands

Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V

Operation temperature: -40°C to +85°C

Dimensions.24 X 24 X 2.6mm

GNSS (GPS,GL ONASS and BeiDou/Compass, Galileo, QZSS)

Data Transfer:


- Uplink up to 375kbps, Downlink up to 300kbps


- Uplink up to 66kbps, Downlink up to 34kbps

EDGE Class

-Uplink up to 236.8kbps, Downlink up to 236.8kbps


-Uplink up to 85.6kbps, Downlink up to 85.68kbps


Power off: 7uA

PSM: 9uA

Sleep: 1mA

Idle: 11mA

USB Driver for Microsoft Windows XPMista/7/8

USB Driver for Windows CE/Mobile

USB Driver for Linux/Android


USB2.0 X 1 (high-speed)

UART X 2 (7-wire UART and 2-wire UART interface multiplex from GPIO)

SIM Card X 1 (1.8V and 3V)

I2C X 1


You can't connect the micro USB interface to power the board directly.

You need use Arduino Uno or Serial module to connect with SIM7000E board.

Connection for SIM7000E and UNOR3:
Power -- 5V
V_MCU -- 5V

Connection for SIM7000E and Serial module:

Note: you need install driver for the serial module and switch it to 3.3V

V_MCU -- 5V

SIM7000E with USB cable

Power -- Red Wire

GND -- Black Wire

Document Link:

Reference link:

CP2102 USB to TTL Serial Module


Core chip: CP2102
Small size:3.1 X 1,8CM
Compatible with 3.3V and 5V
Power suppy output
Overcurrent protection
TTL level interface
RS232 level interface
RS485 level interface
Four level can exchange freely
High-speed communication
DTR,RTS signal

USB to 2.54mm Dupont Female Connector Cable 2Pin


This is customized cable for FZ4111/FZ4112 SIM7000X 4G module.
Cable type: USB to Dupont female connector 2.54mm pitch 2Pin
Cable length: 1meter

Package included:

1 X 4G SIM7000E Breakout Board
1 X Serial module
1 X USB to 2Pin Dupont female connector cable

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products