DIYmall WS2812 Addressable RGB LED Shield + ESP32 Devkit Board + GY-BME280-5V Temperature Humidity Pressure Sensor (DIY0134+FZ2470U-18+FZ1639)

DIYmall WS2812 Addressable RGB LED Shield + ESP32 Devkit Board + GY-BME280-5V Temperature Humidity Pressure Sensor (DIY0134+FZ2470U-18+FZ1639)
Click image for Gallery
  • Product Code: DIY0134+FZ2470U-18+FZ1639_ESP32 Devkit + WS2812 Shield +BME280
  • Availability: In Stock
  • $23.99
  • Ex Tax: $23.99
  • Price in reward points: 3
  • 2 or more $22.50
  • 5 or more $21.50
  • 10 or more $20.50
- +



Tags: WS2812 LED Shield, WS2812 Addressable RGB LED Shield, ESP32 Devkit, GY-BME280-5V, temperature sensor

Introduction:

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,and power management module.
The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and scalable to a variety of applications.

BME280 is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings. And just for fun they threw in a pretty solid humidity sensor in there as well!


So with an I2C connection you have access to enough weather data to make some pretty good predictions for your local area. Or you can just use the pressure sensor with it's abililty to discern the difference in 7.5cm in altitude.  The chip contains smarts to smooth out measurements (since it's so sensitive you don't want slamming doors to mess with your pressure readings, for example) which are fully under your control.


ESP32 WS2812 LED Shield is customize board of two rows of WS2812 addressable RGB LEDs and a tactile tact micro push button switch, with 2 x 18Pin Female Headers pre-soldered onboard, which is to stack the ESP32 Devkit Board 36 GPIOs. Also, there is 4Pin female header which is designed for GY-BME280-5V Temperature Humidity Sensor

The RGB LEDs on the shield behave like a progress bar showing the range of temperature and humidity values. The higher the temperature is, the more LEDs will be lit—the same for the humidity readings. The temperature values are displayed in an orange/yellow color, and the humidity is displayed in a teal color.


With this kit, we can program the ESP32 Devkit board to display a web server with the BME280 sensor readings and show the temperature and humidity range on the LEDs (like two progress bars).


Package included:
1 X ESP32 Devkit Board ESP-WROOM-32 Development Board 36 GPIOs
1 X DIYmall WS2812 Addressable RGB LED Shield
1 X GY-BME280-5V Temperature Humidity Pressure Sensor



Write a review

Note: HTML is not translated!
    Bad           Good

Related Products