ESP8266 Firmware Burning Fixture Development Board Onboard CP2102 Chip with USB to Micro USB Cable 1m Support ESP-01S ESP-07 ESP-12E ESP-12S ESP-F Flash Programming

ESP8266 Firmware Burning Fixture Development Board Onboard CP2102 Chip with USB to Micro USB Cable 1m Support ESP-01S ESP-07 ESP-12E ESP-12S ESP-F Flash Programming
Click image for Gallery
  • Product Code: FZ3489+MB0001-ESP8266 Firmware Burning Fixture with USB cable
  • Availability: In Stock
  • $17.99
  • Ex Tax: $17.99
  • Price in reward points: 2
  • 2 or more $16.49
  • 5 or more $15.49
  • 10 or more $13.99
- +



Tags: ESP8266 Firmware burner, Burning Fixture, Development Board, ESP8266 Flash Downloader Module, esp8266 programmer, CP2102, USB Cable

Feature:

1, The Burning Fixture is with Micro USB interface, onboard CP2102 chip, please make sure your PC has installed CP2102 driver when you flash the new firmwares to ESP8266. Please note that it can only work with the chip module, not works with implementing whole NodeMCUs or other development board.
2, The board support for the firmware flashing of ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F.
3, All I/O ports have been drawn out, it supports one-click firmware download function, and add burning, it is plug and play, makes the programming/flashing for ESP8266 very easy and simple.
4, The USB to Micro USB cable is perfect for you to connect the programing board with your PC. And it is universal usb cable that can be widely used to connect any boards with micro usb interface to the PC or other device.


ESP8266 Firmware Burning Fixture Development Board Micro USB Port Onboard CP2102 Chip with Black USB Cable


Description:
This board supports ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S, ESP-F programming.
It only works with SMD chips/chip module, can't work with implementing whole module like NodeMCUs or other development board.
The board is with Micro USB interface, onboard CP2102 chip, please make sure your PC has installed CP2102 driver before you flash.
All I/O ports have been drawn out, it supports one-click firmware download function, and add burning, it is plug and play, very simple to use it.
Onboard 2 LED indicators, blue LED is for Mode indicator, while green led is for serial communication indicator.
Onboard 2 micro Tactile push button switch, one is Reset, the other is download/flash.
The USB to Micro USB cable is perfect for you to plug the programing board with your PC. And it is universal usb cable that can be widely used to connect any boards with micro usb interface to the PC or other device.


How to program?

Take the programing with espressif flash download tool to flash the file in bin format for example.
1, Download the flash tool from espressif and also install CP2102 driver if you don't install it yet.
2, Open the flash download tool, and choose ESP8266. Fill in the bin file address in SPIdownload.
3, The Flash config will be filled automatically, no need to choose. If not due to different version, you need set the flash config firstly.
4, Choose the COM port, baud rate is default.
5, Click "Start", and it starts to flash. If you failed to flash it, pls click "Stop" firstly, and then re-click "Start"
Note: Please make sure the chip module is seated properly in the programmer before you flash the new firmware!

Package Included:
1 X ESP8266 Burning Fixture Development Board
1 X USB to micro USB Cable black color

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products