IOT-SHT30 IIC Digital Temperature Humidity Sensor 3.3V/5V White Waterproof PE Housing Shell with HY2.0-4P Connector Wire 28cm FZ5338 (Pack of 2pcs/5pcs/10pcs/50pcs)

IOT-SHT30 IIC Digital Temperature Humidity Sensor 3.3V/5V White Waterproof PE Housing Shell with HY2.0-4P Connector Wire 28cm FZ5338 (Pack of 2pcs/5pcs/10pcs/50pcs)
Click image for Gallery
  • Product Code: FZ5338X2_IOT-SHT30 IIC Digital Temperature and Humidity Sensor
  • Availability: In Stock
  • $11.98
  • Ex Tax: $11.98
  • Price in reward points: 2

Available Options

- +



Tags: IOT-SHT30, SHT30 IIC, Temperature Humidity Sensor

Description:

SHT30 Temperature Humidity Sensor, the whole is made of glue and waterproof treatment, to prevent condensation and cause short circuit damage to the sensor. Onboard 10K pull-up resistor and 100nF filter capacitor. The sensor PCB board is encapsulated in the protective cover of the PE cylinder, and it is led out through a 28cm 4Pin 24AWG electronic wire, and the interface is HY2.0-4P (2.0 with lock).


Specification:
Product model: IOT SHT30
Working voltage: 2.15-5.5V
Output signal: IIC digital signal
Humidity measurement range: 0...100%RH
Temperature measurement range: -40...125℃
Accuracy: ±2%RH ±0.2℃
IIC address: 0X44
Product shell material: PE sintered
Interface: HY2.0-4P (2.0 with lock)
Cable length: about 28cm

Note:
In order to prevent the water molecules inside the sheath from condensing into water when the ambient temperature is lowered, which causes the circuit board to be short-circuited or the sensor is damaged, we have applied glue to the circuit board and potted the mouth of the sheath. No interference to the measured value.

HY2.0-4P connector Pin diagram:
Black wire: GND, grouding
Red wire: VCC, Power supply 2.15-5.5V
White wire: SDC, Data signal
Yellow wire: SCL, clock signal


Package Included:
2 X IOT-SHT30 IIC Digital Temperature and Humidity Sensor (default)

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products