DHT11 Temperature Humidity Sensor with XH2.54-3P Terminal, with 1602 I2C LCD Display Module Blue Backlight, Compatible with Arduino

DHT11 Temperature Humidity Sensor with XH2.54-3P Terminal, with 1602 I2C LCD Display Module Blue Backlight, Compatible with Arduino
Click image for Gallery
  • Product Code: FZ0068A+FZ0195 DHT11 Sensor XH2.54-3P terminal with LCD1602 I2C
  • Availability: In Stock
  • $12.50
  • Ex Tax: $12.50
  • Price in reward points: 2
  • 2 or more $11.50
  • 5 or more $10.50

Available Options

- +



Tags: Temperature sensor, Keyes DHT11 sensor, Temperature Humidity Sensor Module, LCD1602 IIC Display Module, 1602 I2C LCD module, DIYmall UNOR3

DHT11 Temperature Humidity Sensor(Pad hole) Anti-reverse Plug XH2.54-3P Terminal

Description:
This is a commonly used temperature and humidity sensor, which mainly uses DHT11 temperature and humidity sensor components. It is a temperature and humidity composite sensor with a calibrated digital signal output. It uses dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliability and excellent long-term stability. The sensor consists of a resistive wetted element and an NTC temperature measuring element, which is conneced to a high performance 8-bit microcontroller. Therefore, the product has the advantages of excellent quality, ultra-fast response, strong anti-interference ability and high cost performance.

The sensor is compatible with various microcontroller control boards, such as the Arduino series of microcontrollers.

At the same time, the sensor comes with 2 positioning holes in diameter 3mm, which allows you to fix the sensor to other devices.

Specifications

Working voltage: DC 3.3-5V Interface: 2.54mm pitch 3pin anti-reverse interface
Positioning hole size: 3mm in diameter
Control signal: digital signal
Temperature range: 0-50 °C ± 2 ° C
Humidity range: 20-90% RH ± 5% RH
Size: 34*22*9mm

IIC/I2C 1602 Serial LCD Module Display Blue Backlight For Arduino
 
Description:
Supply voltage: +5 V
2 supports the I2C protocol
With backlight and contrast adjustment potentiometer
The 4.4 line output easier
 
Connection:
DHT 11 to UNOR3:
S to D2
+ to 3V3
- to GND

1602 LCD to UNOR3:
GND to GND
VCC to 5V
SDA to A4
SCL to A5

Download below two libraries on your Arduino IDE:
DHT sensor library
LiquidCrystal I2C

Package included:
1 X DHT11 Temperature Humidity Sensor with XH2.54-3P terminal
1 X XH2.54-3P terminal to female dupont cable
1 X 1602 I2C LCD Display Module Blue backlight
1 X DIYmall UNOR3 Development board (Optional)
1 X Blue USB Cable for UNOR3(Optional)
1 X 10Pin Male to Female Dupont Cable(Optional)

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products