ESP8266 ESP-01S WiFi Wireless Serial Transceiver Module 4MB Flash + ESP-01 Adapter Board DC3.3V 5V + CP2102 USB to TTL Serial Module

 ESP8266 ESP-01S WiFi Wireless Serial Transceiver Module 4MB Flash + ESP-01 Adapter Board DC3.3V 5V + CP2102 USB to TTL Serial Module
Click image for Gallery
  • Brand: DIYmall
  • Product Code: FZ5076+FZ2400+FZ2760 ESP-01S wifi module +adapter +serial module
  • Availability: In Stock
  • $11.99
  • Ex Tax: $11.99
  • Price in reward points: 2

Available Options

- +



Tags: ESP8266 ESP-01S, WiFi Wireless Serial Transceiver, ESP-01 adapter board, CP2102 serial module, usb to ttl serial module

DIYmall ESP8266 ESP-01S WiFi Serial Transceiver Module 4MB Flash with SPI Mode DOUT

Feature:
    SDIO 2.0, SPI, UART
    32-pin QFN package
    Wi-Fi Direct (P2P), soft-AP
    Integrated TCP/IP protocol stack
    Integrated TR switch, balun, LNA, power amplifier and matching network
    Integrated PLLs, regulators, DCXO and power management units
    +19.5dBm output power in 802.11b mode
    Power down leakage current of <10uA
    Integrated low power 32-bit CPU could be used as application processor
    SDIO 1.1/2.0, SPI, UART
    STBC, 1×1 MIMO, 2×1 MIMO
    A-MPDU & A-MSDU aggregation & 0.4ms guard interval
    Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
    Integrated RISC processor, on-chip memory and external memory interfaces
    Integrated MAC/baseband processors
    Quality of Service management
    I2S interface for high fidelity audio applications
    On-chip low-dropout linear regulators for all internal supplies
    Proprietary spurious-free clock generation architecture
    Integrated WEP, TKIP, AES, and WAPI engines

Specification:
    802.11 b/g/n
    Wake up and transmit packets in < 2ms
    Standby power consumption of < 1.0mW (DTIM3)

ESP8266 ESP-01 WiFi Wireless Serial Transceiver Adapter Module DC3.3V 5V


Description:
A adapter module for ESP-01 Wi-Fi module. 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
Also, the item can be used with For Arduino UNO R3 or compatible board.

Features:
Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator)
Working current: 0-240mA
Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)

6-in-1 CP2102 Multifunction Serial Module USB to TTL 485 232 Converter Module Compatiable with 3.3V 5V


Description:
Core chip: CP2102
Small size:3.1 X 1,8CM
Compatible with 3.3V and 5V
Power suppy output
Overcurrent protection
TTL level interface
RS232 level interface
RS485 level interface
Four level can exchange freely
High-speed communication
DTR,RTS signal

Package Included:
1 X ESP8266 ESP-01S Wifi Module 4MB Flash
1 X ESP-01 Transceiver Adapter Module
1 X CP2102 USB to TTL Serial Module
1 X 4Pin Female to Female Dupont cable

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products