Fully compatible with the Arduino development environment.
Based on an ultra low power design, attains 3.5uA in deep sleep mode, even with the RTC clock running.
LoRa signal output put power range 0~22(±1) dBm.
Low-cost despite its current state of the art technology.
Integrated encryption algorithm protects your investment by rendering cloned firmware inoperative.
Based on proven technology - the new ASR650x, is a combination of the PSoC4000 and SX1262 into a single chip, reducing the overall size to something smaller than the competition.
Support power supply through solar panel.
Support LoRaWAN protocol.
Support AT command.
It is compatible with Arduino. You can modify the parameters such as frequency band in Arduino IDE in "Tools".
Based on ASR6052, those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262.
Onboard solar energy management system, can directly connect with a 5.5~7V solar panel.
Support cross-platform secondary development, compatible with Windows, Linux, and Mac OS Operating Systems.
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures.
Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing.
Use Air530 GPS module, support GPS / Beidou Dual-mode positioning system;
Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information.
CubeCell documents: https://heltec-automation-docs.readthedocs.io/en/latest/cubecell/index.html
How to install CubeCell Arduino Dev Environment:
Install via Arduino Board manager: https://heltec-automation-docs.readthedocs.io/en/latest/cubecell/quick_start.html#use-arduino-board-manager
Install via github for windows: https://github.com/HelTecAutomation/CubeCell-Arduino/blob/master/InstallGuide/windows.md
Install via github for Mac OS: https://github.com/HelTecAutomation/CubeCell-Arduino/blob/master/InstallGuide/mac.md
Install via github for Debian / Ubuntu OS: https://github.com/HelTecAutomation/CubeCell-Arduino/blob/master/InstallGuide/debian_ubuntu.md
Heltec CubeCell series Arduino framework: https://github.com/HelTecAutomation/CubeCell-Arduino
AT Command list: https://resource.heltec.cn/download/CubeCell/AT_Command_list
1 X CubeCell GPS-6502 LoRa+GPS LoRaWAN HTCC-AB02S Devkit (Pin headers not soldered)
1 X IPEX LoRa Antenna
Default frequency 433MHz, 868MHz, 915MHz for option, but you can also change the frequency by revise the code.