DIYmall 5pcs Micro-SD Card Module Mini TF Card Reader Sensor SPI Interface + 1pc Nano V3.0 Micro Controller Board + 1pc 40Pin Female to Female Dupont Cable

Micro-SD Card ModuleMini TF Card Reader Sensor with SPI Interface Onboard Level Conversion FZ0829

Description:
Support SD card(less than or equal 2G), micro SDHC card(less than or equal 32G)
Interface level: 5V or 3.3V
Power supply: 4.5V to 5.5V, onboard 3.3V regulator circuit
Currency: 0.2-200mA
Communication interface: SPI
Onboard level converter circuit, onboard 3.3V voltage regulator to power SD card.
With 4 holes for M2 screw , it is easy to install

Nano V3.0 ATmega328P 5V 16M Micro Controller Board CH340 Chip Mini USB Port FZ1442

Description:
14 Digital input / output ports:TX,RX,D2 ~ D13
8 analog inputs ports:A0 ~ A7
1 pairs of TTL level serial transceiver ports RX / TX
6 PWM ports:D3, D5, D6, D9, D10, D11
Using Atmel Atmega328P-AU MCU
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download

 Note:  when you use it in Arduino IDE, and choose Processor "ATmega328P", and if it does not work, pls choose "Atmega328P(Old Bootloader)".

40Pin 2.54mm Female to Female Dupont Cable 20cm FZ0035

Description:
Quantity: 40Pin
Pitch: 2.54mm
Connector: Female to female dupont connector
Length: 20cm

Package included:
5 X Micro-SD card module
1 X Nano V3.0 micro controller board(without USB cable)
1 X 2.54mm 40Pin Dupont cable female to female